HeartbeatHocusFocusFilesMacHyperTile
Guide

A Mac battery draining fast, from the Energy tab to the cycle count

Apple's numbers for what drains a Mac battery, how to read Energy Impact and battery health, and why an old battery drains faster than a new one.

By Chethan Kumar S N · Updated

A Mac battery that drains fast is one of the few complaints where the machine has already written down the answer. macOS tracks what used the power, when the screen was on, how many times the battery has been round the block, and even which process is refusing to let the Mac sleep. None of it is hidden, and most of it needs no app.

The trouble is that people look in one place for one number, and there are two questions hiding in the same sentence. Is something using more power than it should, or does the battery hold less power than it used to? Apple treats those as different rows on the same screen, Energy and Health, and the fix for one does nothing for the other.

Everything below comes from Apple’s own pages, read while writing this, or from read-only measurements on the Mac this page was written on, a 14-inch M1 Pro laptop running macOS 27.0.1. Nothing was installed and no setting was changed.

Apple’s own list of what uses the power

Apple keeps a page called Save energy on your Mac, and it is shorter and less mystical than most battery advice. Its list, in its own order, is the display, Wi-Fi and Bluetooth, accessories you are not using, and apps.

The display is first for a reason. Apple’s advice is to dim it to the lowest comfortable level and to set it to turn off after inactivity, with separate pop-ups for battery and for the power adapter under Lock Screen settings. Then Wi-Fi and Bluetooth, with the sentence that explains why they matter even when you are not actively using them: they consume energy even when they are not used. That is not a figure of speech on the Bluetooth side. The daemon that runs it scans for nearby devices continuously, handles a proximity request from sharingd every ten seconds, and posts a radio status update every five seconds, all day, on a Mac with nothing connected. The Wi-Fi side is not idle either while Location Services is on: the daemon behind it logged 15,790 lines in one measured hour on a Mac where nobody had opened a single location app, most of it Find My beacon observations for other people’s devices, which is the searchpartyd daemon’s listening half at work. The sound system clocks in too: the daemon that runs it powered the speakers up and back down six times in a quiet measured half hour, and at about sixty six minutes of processor time a day it is the busiest daemon this series has measured. Then accessories, where Apple names external hard drives and connected drives as things to disconnect when you are not using them. And then apps, with the line worth remembering:

Quit apps that you aren’t using. Even an app you aren’t using may be working in the background and consuming energy.

That is the whole shape of the problem. Nothing on that list is exotic, and none of it is a fault.

Two kinds of too fast

The reason battery threads go in circles is that the two explanations produce the same symptom and live in different places.

The first kind is a machine that is doing more work than it should be, and its home is the Energy tab in Activity Monitor. The number there, Energy Impact, is a relative score rather than watts, and the second column, 12hr Power, averages the last twelve hours rather than the last five seconds. A process that climbs during a glance and settles when you look away shows up in the average and hides from the instant reading.

The second kind is a battery that is older than it was, and its home is Battery settings, which is a different pane in a different app. Apple is careful about the wording here. Battery Health reports a condition of Normal or Service recommended, and the second one means the battery is performing normally but its ability to hold a charge is less than when it was new. Nothing about that is a symptom of a background process. A worn battery drains faster doing exactly the same work, which is why quitting apps does not help it and why the two problems get confused.

In Battery settings, Apple’s rows tell you which one you are looking at. Battery shows the current level and any alerts. Low Power Mode is a three-position pop-up: Always, Only on Battery, Only on Power Adapter. Energy Mode is Low Power, Automatic or High Power. Battery Health holds the condition and the maximum capacity. Charging holds Charge Limit and Optimised Battery Charging. And then two history views that most people never scroll to, Last 24 Hours with battery level and screen on usage, and Last 10 Days with energy usage and screen on usage per day. Those two charts are the closest thing macOS has to a record of “is this normal for me”, which is a better comparison than anyone else’s screenshot.

Find the process that is eating it

Activity Monitor is the windowed route. Open it, click Energy, and sort by Energy Impact, then leave it open for a few minutes rather than reading one refresh. Apple’s own figures update on a timer, so a single reading is a photograph of a moving thing.

Terminal does the same job in two lines, and it is the version worth knowing because it can be typed into a message when you want a second opinion:

$ top -l 2 -o power -n 10 -stats pid,command,power,cpu

The -l 2 matters. The first sample from top is a baseline and reports zeros, so the useful rows are in the second block. The POWER column is the same energy figure Activity Monitor ranks by, and -o power sorts on it.

On the machine this page was written on, taken while it was genuinely busy:

PID    COMMAND          POWER %CPU
92866  com.apple.MapKit 26.8  26.8
483    WindowServer     25.3  25.2
812    FileAnalysisServ 19.2  19.2
90399  top              16.0  16.0
28790  backboardd       12.8  12.8
1640   HeartbeatMac     10.4  10.4

Read that honestly and it says what a busy Mac looks like rather than what a broken one looks like. The top three are a background map service, the window server and the file analysis service, all of them doing work that was asked for at the time. top itself is on the list at 16, which is a fair warning about measuring power while running a power measurement. What you are looking for is not a process near the top of a list like this. It is a process that is near the top while you are doing nothing.

Find what is keeping the Mac awake

This is the section that answers most of the searches about a closed lid, an overnight drain and a Mac that was asleep all day. Sleep is not the same as off, and Apple says so plainly on its sleep and wake page:

Keep in mind that delaying, preventing or allowing disruption of sleep may increase power consumption.

Three documented things disrupt it, and all three are visible.

The first is a power assertion, which is a request from software that keeps the Mac from going to sleep. The list is one command, no privilege needed:

$ pmset -g assertions
2026-11-14 10:06:54 +0530
Assertion status system-wide:
   PreventUserIdleDisplaySleep    1
   PreventUserIdleSystemSleep     1
Listed by owning process:
   pid 2471(caffeinate): [0x000000d80001839d] 597:08:20 PreventUserIdleSystemSleep named: "caffeinate command-line tool"
	Details: caffeinate asserting forever
	Localized=THE CAFFEINATE TOOL IS PREVENTING SLEEP.

That is not a hypothetical. On this Mac a command-line tool called caffeinate had been holding the machine awake for 597 hours, which is the whole duration of the current boot. The pmset -g summary names the same culprits in its own words:

 sleep                1 (sleep prevented by caffeinate, powerd, Claude)
 displaysleep         2 (display sleep prevented by caffeinate, CopperRiver)

Two of those are Electron apps doing what open apps do. The third is the interesting one, because caffeinate is what people are told to run by every “my downloads keep stopping” post on the internet, usually without a time limit. If you have ever followed that advice, this is where the consequence shows up.

The second is Wake for network access, which lets the Mac briefly wake to serve shared printers, Music playlists and file shares. Apple’s setting is a pop-up with three positions, always, on the power adapter, or never. On a Mac that spends its nights on battery, that setting alone can be the difference between losing two per cent and losing twenty.

The third is scheduled wakes. Apple’s analytics and calendar services set alarms to do work at quiet hours, and the list is public:

$ pmset -g sched
Scheduled power events:
 [0]  wake at 11/13/2026 01:34:18 by 'com.apple.alarm.user-invisible-com.apple.calaccessd.travelEngine.periodicRefreshTimer'
 [1]  wake at 11/13/2026 05:22:07 by 'com.apple.alarm.user-invisible-com.apple.osanalytics.hardhighengagementtimer'

Two alarms, both marked user-invisible, which is Apple’s own label for the fact that nothing on screen will tell you they happened. The first belongs to calaccessd, the calendar data daemon, whose travel engine books a wake roughly every eight hours to keep time zone shifts from surprising your calendar. And a count of them, from the power log:

$ pmset -g log | grep "Total Sleep"
Total Sleep/Wakes since boot:962

962 sleep and wake events since the last restart. Most are micro-wakes of seconds or minutes, and the honest reading is that this number is normal for a Mac that has been up for three weeks with services doing scheduled work. What matters is whether it is high relative to your own uptime and whether your battery drops more overnight than your neighbour’s does.

One more thing belongs here, because it is the one setting that sounds like it helps and does not. Slightly dim the display on battery is a real energy saving. Prevent automatic sleeping on power adapter when the display is off is not a battery setting at all, because it only applies while plugged in. And Charge Limit, which caps the charge level to protect the battery’s lifespan, will make the battery status menu stop showing an estimated time to full, which Apple documents as expected rather than broken.

Read the battery’s own numbers like Apple does

Now the other half. Battery settings shows a condition and, behind the Info button, a maximum capacity and a cycle count. Two of those need interpreting.

Condition is the easy one. Apple’s page on checking it lists exactly two possibilities. Normal means the battery is functioning normally. Service recommended means it is performing normally but holds less charge than when it was new, and Apple’s advice is that you may want to consider replacing it, that you can keep using it before it is checked, and that non-genuine parts and untrained repairs risk safety and function. Older Macs without the Health panel show the same idea in the battery status menu when you hold Option, as Replace Soon, Replace Now or Service Battery.

Maximum capacity is the number people argue about, and it is a percentage relative to when the battery was new. There is no threshold below which a Mac stops working. There is only a slope.

Cycle count is the one worth understanding properly, and Apple’s article on it is clear that a cycle is not a charge:

A charge cycle happens when you use all of the battery’s power, but that doesn’t necessarily mean in a single charge. For example, you could use half of the battery’s power in one day, and then recharge it fully. If you did the same thing the next day, it would count as one charge cycle, not two.

Apple also states the design target, which is the sentence the whole section hangs on:

Your battery is designed to retain up to 80% of its original charge capacity at its maximum cycle count.

And the part that matters on a laptop that feels old: you can keep using the battery past that count, but you might notice a reduction in battery life. Apple prints a maximum cycle count per model, 1,000 for the 14-inch and 16-inch MacBook Pro from 2021 among them, and the way to see yours without any software is to hold Option, choose System Information from the Apple menu, and look under Power.

On the Mac this page was written on, that section reads like this:

      Health Information:
          Cycle Count: 1389
          Condition: Service Recommended
          Maximum Capacity: 74%

1,389 cycles against a rated 1,000, and 74 per cent capacity against a rated 80 per cent at the rated count. The battery is not broken, and the laptop is not slow. It just holds about three quarters of what it did when it was new, which is the entire reason it now needs a charger at lunchtime. There is a second way to see the same thing, and the arithmetic is a useful cross-check:

$ ioreg -rn AppleSmartBattery -w0 | grep -oE '"(DesignCapacity|NominalChargeCapacity)"=[0-9]*'
"NominalChargeCapacity"=6581
"DesignCapacity"=8694

6,581 divided by 8,694 is 76 per cent, near enough to the 74 that Battery settings reports, and the two figures come from the same gauge.

Apple has one more instruction here that is easy to skip and decides which number to trust. Third-party apps that report battery health might not be accurate or conclusively indicate diminished runtime, and it is best to rely on the information macOS reports. A menu bar app showing 91 per cent while macOS shows 74 is not finding hidden capacity. It is reading a different number and calling it health.

The after-update question

The single most common shape of this search includes the words after update, and the honest answer is that updates cause real work that ends, plus one thing that does not.

The work that ends is reindexing. Spotlight rebuilds its index after a system update, and Apple’s own conditions for finishing faster are that the device is not in use, is connected to a power source, and is connected to the internet. A Mac that was just updated, then unplugged and carried around while being used, has been given the slowest possible path through that job. The Spotlight page covers what the index is doing and how long it takes. Photo libraries rescan, mailboxes re-download, and caches rebuild for the same reason: the system changed underneath them.

The thing that does not end is the battery’s chemical age, which moves in one direction and is measured by the numbers above rather than by the version of macOS. So a useful way to separate them is to check both. Open Activity Monitor, sort Energy, and see whether anything is working. Then open Battery settings and read the condition and capacity. If the first is quiet and the second has moved, the update is being blamed for something it did not cause.

What actually changes the number

In the order that gives the most per minute spent.

Use Low Power Mode on battery. Apple’s description is one line, reduce energy usage to increase battery life, and the pop-up lets you apply it only when unplugged. On Macs with Energy Mode, the same idea appears as Low Power, Automatic and High Power, and Apple’s wording for the top end makes the trade explicit: High Power increases energy usage to improve performance during sustained workloads.

Turn the display off sooner. It is the largest single draw on a laptop and the only one with a built-in timer. Apple’s Lock Screen settings hold separate pop-ups for battery and power adapter, and its own advice is to set them rather than to think about them.

Handle sleep honestly. Quit what you are not using, take caffeinate and anything like it out of your login items if you set it up months ago, and set Wake for network access to never unless you actually share printers or Music playlists from this Mac. If you are not sure what is on that list, the background items page reads it row by row, including the ones that report when they last ran. Apple’s point is not that any of these is wrong, it is that each of them costs power and the cost should be a decision.

Cap the charging if the Mac lives on a desk. Charge Limit and Optimised Battery Charging exist to slow chemical ageing rather than to change today’s runtime, and Apple describes Optimised Battery Charging as learning your routine and delaying a charge past 80 per cent when it predicts you will stay plugged in. Neither of them makes the battery last longer on a given charge. Both make the battery stay useful for more years.

And if the capacity is genuinely low and the cycle count is genuinely high, the honest answer is a battery replacement, which is the one item on this list that costs money and the one that actually fixes a worn battery.

Where window managers fit

None of this is a window problem, and a window manager that claimed to save battery would be worth ignoring. What a window manager does affect is how much of your day is spent moving windows around, and that is screen-on time, which is the one number Apple puts in both of its battery history charts.

If your Mac is busy and you are chasing down which process is responsible, the same three numbers decide whether a Mac is slow or just working, and it is a bad time to also be fighting with a desktop full of overlapping windows. Ribbon keeps every window open at full size on one scrolling strip instead of stacking them, so getting to the one you want is a trackpad swipe rather than a hunt, and nothing shrinks or hides behind anything else. It is $15, once, for up to 3 Macs, with a full refund within 10 days, and it runs on macOS 14 Sonoma and later on Apple silicon and Intel Macs. You can drive the strip in your browser before installing anything.

The short version

A Mac battery drains fast for one of two reasons, and Apple splits them for you. Either something is using more power, which is the Energy tab in Activity Monitor and the ENERGY rows in Battery settings, or the battery holds less, which is Battery Health and the cycle count. Check both, because they look identical from the outside and respond to completely different fixes.

If the Mac loses charge with the lid closed, look at what is disrupting sleep. pmset -g assertions names every process holding the machine awake, pmset -g sched lists the wakes already booked, and Wake for network access decides whether your Mac answers the door. On the machine this page was written on, a forgotten caffeinate had been holding sleep off for 597 hours.

If the battery is simply old, the numbers will say so. Apple rates its laptop batteries to hold 80 per cent of their original capacity at a maximum cycle count, and prints that count per model. This Mac reads 74 per cent at 1,389 cycles against a rated 1,000, which is not a fault, it is arithmetic. Trust the figure macOS reports rather than a menu bar app that disagrees, set the display to sleep sooner, use Low Power Mode on battery, and stop blaming the last update for a curve that has been bending for two years.

Questions

Why is my Mac battery draining so fast all of a sudden?

Sudden usually means something changed, and Apple lists the candidates in one place. Its page on saving energy names the display, Wi-Fi and Bluetooth, accessories you have left plugged in, and apps that keep working in the background, and it says outright that even an app you are not using may be working and consuming energy. So the first check is not the battery at all, it is Activity Monitor's Energy tab: Energy Impact is Apple's relative measure of power use right now, and 12hr Power averages it, which is what catches a process that spikes every few minutes and looks idle when you glance at it. The second check is what is keeping the Mac awake, which is where a stray terminal tool that stops sleep tends to show up. Both are covered below, and neither needs anything installed.

Why does my Mac battery drain when the lid is closed or while it is asleep?

Because sleep is not off, and Apple is explicit that disruption of sleep costs power. Its sleep and wake page says to keep in mind that delaying, preventing or allowing disruption of sleep may increase power consumption. Three documented things do the disrupting: an app or command holding a power assertion that stops the Mac sleeping at all, Wake for network access, which wakes the machine to serve shared printers and Music playlists, and scheduled wakes set by system services. All three are visible without installing anything. The assertion list is pmset -g assertions, the sleep and wake history is pmset -g log, and the pending alarms are pmset -g sched. On the Mac this page was written on, a command called caffeinate had been preventing sleep continuously for 597 hours, which is the entire time since the last boot.

Does a macOS update make the battery drain faster?

Often, and usually temporarily and honestly explainable. An update triggers reindexing, and Apple's own account of Spotlight is that indexing finishes sooner when the device is not in use, is on power and is connected to the internet, which is the exact opposite of a Mac you update and immediately carry to a meeting on battery. A new install also rebuilds caches and photographs can rescan, and both are real work. What is not temporary is a change in the numbers under Battery Health, because those track the battery's chemical age rather than the software on it. If the drain persists for a week with Energy Impact low and health unchanged, it is worth treating as its own problem rather than waiting for it out.

What does Service Recommended mean on a Mac battery?

It means the battery's ability to hold charge is less than when it was new, or that it is not functioning normally, and in the first case Apple says you can keep using the Mac safely. The setting shows two states, Normal and Service recommended, and the second one is not a failure announcement; it is a capacity statement. Apple's own caution here is worth repeating, because it decides which number to trust: third-party apps that report battery-health conditions might not be accurate or conclusively indicate diminished runtime, and it is best to rely on the battery-health information reported by macOS. On the Mac this page was written on, Battery Health reads Service Recommended, Maximum Capacity 74 per cent and 1,389 charge cycles, which is a battery doing its job past the point Apple rates it for.

Does Low Power Mode actually help, and does it slow the Mac down?

It helps, and yes, that is the trade. Apple describes Low Power Mode as reducing energy usage to increase battery life, and it is a pop-up in Battery settings with three positions rather than a switch: Always, Only on Battery and Only on Power Adapter. Newer Macs also show Energy Mode with Low Power, Automatic and High Power, and Apple's description of High Power is that it increases energy usage to improve performance during sustained workloads, so the two ends of that slider are the honest statement of the trade. For most people the useful setting is Low Power Mode on battery only, which leaves the Mac at full speed when it is plugged in and quietly trims it when it is not.

Ready? Buy Ribbon for $15, or read all the guides.