HeartbeatHocusFocusFilesMacHyperTile
Comparison

Ribbon vs Loop

Loop pops a radial menu over the window you are on and you point the way you want it to go. Ribbon arranges every window on a scrolling strip instead. Which one suits your day?

By Chethan Kumar S N · Updated

Loop and Ribbon both start from the same complaint, that macOS has never had good window management, and they answer it from opposite ends. Loop gives you a menu you summon over the window you are looking at. Ribbon gives you a layout that is already in place, and you move along it.

The short version

Side by side

LoopRibbon
KindA radial menu you summon on the focused windowA layout that is already arranged
What you doHold the trigger key, point in a directionSwipe, or press ⌃⌥ ← →
Placing windowsYou pick a shape for each window, each timeNone: a window opens as the next column
New windowsOpen where their app puts them until you actArrive on the strip at full height
OverlapPossible until you move or cycleNone, ever
Exact shapesHalves, quarters, thirds both ways, maximise, almost maximise, centre, macOS centre, full screen⌃⌥R cycles ⅓, ½ and ⅔; ⌃⌥F fills and restores; a saved width per app
Before you commitA preview window shows the frame firstNot needed: the window is already where it will stay
Stepping through shapesCycles: press the same key combination again to go round⌃⌥ → walks one column; the strip map shows where you are
Windows you want out of the wayStash hides a window at the screen edge and brings it back on hover or a keybindWindows are columns rather than clutter, but ⌃⌥T floats one out of the strip and ⌃⌥` brings it back
Scriptingloop:// URLs and AppleScriptribbon:// URLs, a CLI and Raycast scripts
AppearanceRadial menu width, shape and colour; preview padding and borderSix strip map styles, plus a width per app
Running it firstFree, so nothing to tryNo trial, 10-day refund, and a demo on the home page
PriceFree and open source$15 once, up to 3 Macs
RequiresmacOS 13 or latermacOS 14 Sonoma or later, Apple silicon and Intel
Where it comes fromgithub.com/MrKai77/Loop, or brew install loopribbonmac.com

Loop is a menu you point at. Ribbon is a strip that holds.

Loop is built around one gesture. You set a trigger key, hold it, and move the cursor in a direction. A radial menu appears where the cursor is, and the window you were in takes the shape that direction means. Point left for the left half, up and left for the top left quarter, right twice for a right third. Let go of the key and the menu is gone, along with the window’s old position.

The part worth copying is the preview: before Loop commits, it draws the frame the window is about to take, so you can see a left two thirds is not what you meant and move the cursor on. There is also a cycle, where pressing the same key combination again steps the window through a series of shapes rather than repeating one, and a stash, which parks a window at the screen edge and brings it back when you hover there or press its keybind.

What Loop does not do is decide anything on its own. A new window still opens where its app puts it, which on a big display usually means partly over whatever you were reading. You then point a direction at it. That is the whole interaction, and it is a good one: it is faster than dragging to a screen edge once the directions are in your fingers, and directions do not need a screen edge to exist, so it works the same on a display with three windows already on it as on an empty one.

Ribbon skips the pointing. The layout is decided as windows open: each one takes its own full-height column beside the one you are in, and the strip runs past the left and right edges of the screen. To reach a window you move the strip, with a three-finger swipe or ⌃⌥ ← →, and ⌃⌥1–9 jumps straight to a column. There are no cells to fill and no menu to open, because at no point is a window waiting for you to decide what shape it should be.

Where Loop wins

Where Ribbon wins

What they agree on

Both apps are native, both live in your menu bar, and both need Accessibility permission before they can move a window they do not own, because that is the only door macOS opens to any app that manages windows. Turn it off in System Settings and both will look broken in the same way, which is why the first thing to check when a window manager stops working is that switch.

Neither app is on the Mac App Store. Loop is distributed from its GitHub releases and through Homebrew, and Ribbon ships as a signed, notarised download from ribbonmac.com. Same sandbox in both cases: an App Store app cannot move windows belonging to other apps, and moving other apps’ windows is the entire job.

Can you run both?

Yes. They are barely aware of each other, because Loop is idle until you hold its key and never moves anything by itself. The workable setup is to let Loop keep the things Ribbon leaves alone: stash a floating window at the edge, maximise a video call, send something to another display without touching the strip. If you have a habit of snapping with the cursor, Loop still works on floating windows, dialogs and anything you have floated with ⌃⌥T.

The one thing to skip is a Loop action on a window that is already on the strip. Two apps moving the same window is one app undoing the other, and a half-screen window on a strip is both cramped and now outside the layout. Move it with ⌃⌥ → instead, and the strip stays true.

Switching from Loop

  1. Open Loop’s settings and pull back to the actions you actually use, or leave the radial menu for floating windows only. There is no rush to uninstall it; a stash at the screen edge is a genuinely good pair with a strip.
  2. Install Ribbon and grant Accessibility access when it asks.
  3. Open your apps in the order you want them. If a three-finger swipe is already spoken for, Ribbon will point out the clash before you hit it.

Or drive the strip in your browser first, with your arrow keys, and see whether a layout that holds by itself is worth giving up the menu.

Questions

Is Ribbon a Loop alternative?

It is, if what you want from Loop is that windows stop covering each other. Loop is a radial menu you summon on a window: hold its trigger key, point in a direction, and that window takes the shape you pointed at. Ribbon arranges every window on its own full-height column as it opens, so there is nothing left to point at.

Can I run Loop and Ribbon together?

Yes, and it takes less care than two snapping apps do. Loop only acts while you hold its trigger key, so it stays quiet while you move along the strip. The one thing to avoid is a Loop action on a window that is already on the strip: both apps would be moving it and they will take turns correcting each other.

Does Ribbon have a radial menu or an on-screen grid?

No. Ribbon has no menu to open and no drag targets, because the layout is already there. Widths come from ⌃⌥R, which cycles the focused column through ⅓, ½ and ⅔ of the screen, ⌃⌥F to fill and restore, ⌃⌥C to centre, and each app can remember a width of its own.

Is Loop free?

Yes. Loop is open source under the GPLv3 and its development is funded through GitHub sponsors. Ribbon is $15 once for up to 3 Macs, with a full refund within 10 days and no trial. If free is the deciding factor, Loop is the free one.

Ready? Buy Ribbon for $15, or read all the guides.