ShiftIt for a Mac: what to use instead
ShiftIt still downloads from GitHub, but the app is unsigned, Intel-only and unchanged since 2018. Here is the full shortcut map and what to use instead.
By Chethan Kumar S N · Updated
Before Rectangle, before Magnet, before Apple built tiling into macOS, there was ShiftIt. You installed it, you granted it permission to move windows, and from then on the keyboard arranged your screen: one hand on the bottom-left corner of the keyboard, a tap of an arrow key, and the window you were looking at slid into the left half. No mouse, no grid, no menu bar icon to click unless you wanted one.
It was free, it was open source, and for most of the 2010s it was the answer to “how do I snap windows on a Mac” in every forum thread. Its repository has about 5,500 stars and the last release has been downloaded more than 600,000 times.
Then it stopped. Not with an announcement and a farewell post, but the way open source projects usually stop: the person who wrote it went off and used something else, and the code sat where it was.
What ShiftIt actually did
The entire app is a list of keyboard shortcuts. There is no layout to configure, no grid to draw, no arrangement that persists. You press a key combination, the front window moves into a shape, and the app forgets about it. The menu bar icon is optional, and it can be hidden completely.
That sounds like little, and it was the whole point. ShiftIt’s readme describes it in one line: an application for OSX that allows you to quickly manipulate window position and size using keyboard shortcuts.
What surprises people who used it years ago is how many shortcuts there were. ShiftIt shipped 25 actions, and by default every one of them sits on Control-Option-Command plus a single key, so the whole set is reachable without moving your hand.
| What it did | Default key |
|---|---|
| Left half | Control-Option-Command-Left |
| Right half | Control-Option-Command-Right |
| Top half | Control-Option-Command-Up |
| Bottom half | Control-Option-Command-Down |
| Top left quarter | Control-Option-Command-1 |
| Top right quarter | Control-Option-Command-2 |
| Bottom left quarter | Control-Option-Command-3 |
| Bottom right quarter | Control-Option-Command-4 |
| Left third, top | Control-Option-Command-U |
| Left third, bottom | Control-Option-Command-J |
| Centre third, top | Control-Option-Command-I |
| Centre third, bottom | Control-Option-Command-K |
| Right third, top | Control-Option-Command-O |
| Right third, bottom | Control-Option-Command-L |
| Left third | Control-Option-Command-Q |
| Centre third | Control-Option-Command-W |
| Right third | Control-Option-Command-E |
| Centre the window | Control-Option-Command-C |
| Toggle zoom | Control-Option-Command-Z |
| Maximise | Control-Option-Command-M |
| Toggle full screen | Control-Option-Command-F |
| Make it larger | Control-Option-Command-= |
| Make it smaller | Control-Option-Command with the minus key |
| Send it to the next display | Control-Option-Command-N |
| Send it to the previous display | Control-Option-Command-P |
Nine of those 25 go to thirds, which is more than most window managers manage today, and more than Apple’s own tiling has keys for. Two of them, Toggle Zoom and Toggle Full Screen, are the same two buttons that live in the top-left corner of every Mac window, put on a keyboard. Maximise is the one that fills the desktop.
There is one more trick worth knowing, because it is the part people describe when they recommend the app. Press the left-half key a second time and the window does not stay at half. It moves to a third, and a third press takes it to two thirds, before cycling back. That is ShiftIt deciding you probably meant the next size down rather than the same size again. It is on by default, and the readme notes that the only way to change it is a command in Terminal:
defaults write org.shiftitapp.ShiftIt multipleActionsCycleWindowSizes NO
Windows can also be inset from the screen edges so they do not touch the Dock or the sides, which ShiftIt handles with a set of margins, off by default.
Why it stopped
The answer has been sitting in a public issue since 13 November 2018, and it is more human than most. The project’s readme carries a heading that says it plainly: Looking for a new maintainer, followed by “Until that transition is completed, there will likely not be further development on this project.”
The issue behind that heading is the maintainer explaining himself. His MacBook was stolen, from a hotel room, in Vienna. The university where he worked took a while to issue a replacement, so he spent the wait on a Dell running Linux. By the time a new MacBook Pro turned up he had settled into Linux, found the touch bar and the keyboard irritating, and decided he did not want to go back. He wrote that he no longer used macOS, so he could not keep maintaining a macOS app. The issue has 37 comments and is still open, eight years later.
The dates do the rest of the work. The last release, version 1.6.6, was published on 1 March 2018, months before that issue. The last commit of any kind was pushed on 20 November 2023. The repository has 166 open issues. The most recent one was opened on 30 October 2026, is titled “support apple arm64”, and has no replies at all.
The tracker is also a record of the app coming apart on newer systems, one macOS at a time. “Don’t work on macOS Sonoma”, opened in July 2023, still open. “Doesn’t work on Ventura 13.5”, August 2023, still open. “Crash on any resizing action on macOS 13.3 Ventura”, April 2023. None of them were answered with a release, because there was nobody left to write one.
Unlike Spectacle, which archived its repository and told everyone to move on, ShiftIt is still formally an open project. In practice the two biggest forks tell you what that is worth. One has 84 stars and was last pushed in 2011. The other has 61 stars and was last pushed in February 2022. Nobody has forked ShiftIt into a maintained app still carrying its name.
The download is still there, and here is what is in it
The release page on GitHub still serves the file, so the obvious question is what you actually get. A few things, all measured from the copy on the release page rather than from memory.
It is small and it is old. ShiftIt 1.6.6 is a zip of 831,603 bytes, and the app inside carries the bundle identifier org.shiftitapp.ShiftIt, version 1.6.6, a minimum macOS version of 10.8, and an executable of 316 KB with a file date of 1 March 2018. It was built with Xcode 9.2 against the macOS 10.13 SDK, which is the toolchain from the autumn of 2017.
It is not signed. Checking the app gives one line: “code object is not signed at all”. The readme tells you to right-click the app the first time and choose Open so Gatekeeper lets it through, and on a current Mac that is still the route, because nothing has been added to the bundle since.
It is Intel-only. The executable has a single x86_64 architecture and no arm64 slice, so an M-series Mac has to run it through Rosetta 2, which is a separate install. It is the same shape of problem as every other abandoned Mac app from that era.
And its own updater still works, and still reports nothing. The app points at a Sparkle update feed on GitHub, that feed is live, and its newest item is version 1.6.6 from 1 March 2018. There is no newer version to be told about. That is a neat, sad little detail: the app is checking in and being told the truth.
One more thing that catches people out, and it is in ShiftIt’s own instructions. The readme offers a Homebrew install line, brew install shiftit --cask, and it no longer resolves. ShiftIt is not in the Homebrew cask index at all any more. Of the 7,831 casks in the current index, none of them is this app. If you go looking for it that way, the command will simply fail.
The shortcut map, and where each key lives now
This is the part that decides whether replacing ShiftIt costs you a fortnight of retraining. Read the middle column as what macOS gives you today with nothing installed, and the right column as what you get from the Hammerspoon configuration the ShiftIt project points at.
| ShiftIt action | macOS, since Sequoia | ShiftIt Spoon for Hammerspoon |
|---|---|---|
| Left, right, top and bottom halves | Fn-Control with the arrow keys | Control-Option-Command with the arrow keys |
| The four corners | No shortcut | Control-Option-Command-1 to 4 |
| Centre the window | Fn-Control-C | Control-Option-Command-C |
| Maximise | Fn-Control-F | Control-Option-Command-M |
| Toggle full screen | Control-Command-F in most apps | Control-Option-Command-F |
| Toggle zoom | No shortcut | Control-Option-Command-Z |
| Larger and smaller | No shortcut | Control-Option-Command-= and Control-Option-Command with the minus key |
| Next and previous display | No shortcut | Control-Option-Command-N and Control-Option-Command-P |
| The nine thirds | No shortcut | Not in the spoon |
Two things fall out of that table.
Apple’s tiling covers six of ShiftIt’s 25 shortcuts, and they are the six least interesting ones. Halves, a centred window and a fill have been built in since Sequoia, with no app to install. The four corner positions exist in Apple’s own menu, with no keyboard shortcut for any of them, which is a strange gap given how easy the arrow keys make the halves. Thirds, resizing by degrees and moving a window between displays are not in Apple’s shortcut table at all.
The ShiftIt Spoon covers 16 of the 25. It has the sides, the corners, the centre, maximise, full screen, zoom, the two resize keys and the two screen keys, all on the modifier set you already know. What it does not have is the nine third actions, so those are the only part of ShiftIt you genuinely cannot get back on the original keys. Rectangle has thirds, but on a different modifier set.
Why the ShiftIt Spoon is the straight swap
The ShiftIt readme ends its alternatives section by recommending one thing: a Hammerspoon configuration that implements the same functionality. The project also keeps a wiki page walking through building it yourself. When a maintainer tells you where to go, that is worth taking seriously.
A quick word on what the pieces are, because “Hammerspoon” puts some people off. Hammerspoon is a free, open source Mac automation tool, MIT licensed, with about 16,400 stars and a current release, 1.1.1, published in February 2026. It is in Homebrew as brew install --cask hammerspoon. The ShiftIt Spoon is a small configuration written by a separate author in 2020 that binds Hammerspoon’s window functions to ShiftIt’s keys. It has about 500 stars, it is MIT licensed, and its last code change was July 2023.
Installation is four steps, and the spoon’s readme is clear about all of them. Install Hammerspoon. Download the spoon zip and open the unzipped ShiftIt.spoon file in Finder, which is how Hammerspoon files it in the right folder. Add two lines to the config file Hammerspoon opens for you:
hs.loadSpoon("ShiftIt")
spoon.ShiftIt:bindHotkeys({})
Then reload the config and grant Hammerspoon Accessibility permission, which is the same permission ShiftIt needed for the same reason.
The honest cost is that last part. Your keyboard shortcuts now live in a text file, and if something goes wrong you are reading Lua rather than clicking a checkbox. The spoon has a known-issue section all of its own about an “attempt to index nil value” error, and the answer is always that either the permission is missing or the spoon is in a folder with a different name than the one in your config. If the idea of any of that makes you tired, skip it and read the next section instead. That is not a criticism of Hammerspoon. It is a piece of software for people who dislike GUIs, and it says so.
The alternatives, briefly
If you would rather buy your way out of a config file, the market is wider than it was in 2011.
| App | Kind | Price | Why you would pick it over the spoon |
|---|---|---|---|
| macOS’s own tiling | Built in | Free | You want halves and a centred window and no extra app at all |
| Rectangle | Snapper | Free, open source | You want corners and thirds on keys, and no config file |
| Magnet | Snapper | $4.99 | You want an App Store receipt |
| Moom | Snapper and toolbox | $15, free trial | You want exact sizes, grids and saved layouts |
| Swish | Gesture snapper | $16, 14-day trial | You want to snap with a trackpad gesture rather than a key |
| Loop | Radial snapper | Free, open source | You would rather point at the spot than name it |
| Amethyst, AeroSpace, yabai | Tilers | Free, open source | You want a layout that applies itself |
| Ribbon | Scroller | $15 once | You are tired of placing windows one at a time |
Rectangle is the one most ShiftIt users land on, and it is a reasonable landing place. It is free, it is open source, its current build is version 2.0.4 from October 2026, and it asks for macOS 14 or later. Its defaults are Option-Command rather than Control-Option-Command, but nothing is fixed: every action can be rebound, so the ShiftIt keys can be moved across by hand in about ten minutes.
Moom is the other one worth naming for a specific reason. It still supports macOS 10.13 and later, which matters if ShiftIt is on your Mac because your Mac is old. It is $15 with a free trial, with an $8 upgrade path for existing owners.
The two dead snappers from the same era have their own pages now: Spectacle for a Mac, which archived itself in 2022 and handed its shortcuts to Rectangle, and Divvy for a Mac, which is somehow still on sale at $13.99 with a 2019 build. ShiftIt is the third of the set, and the one nobody handed anything to.
If what you liked was the keys, not the shapes
There is a version of this where the app was never the point. ShiftIt’s real argument was that a keyboard should be able to arrange a screen, and that argument won: Apple ships tiling now, and every app in the table above agrees with it. What ShiftIt could not do, because nothing did in 2011, is hold an arrangement for you. You pressed a key, a window moved, and ten minutes later you pressed the same key again to put it back.
A scrolling window manager takes the other half of the job. Instead of a key that moves a window into a place, every window gets its own full-height column on one strip that runs past the edges of the screen, and nothing shrinks to make room. Open a sixth window and the strip gets a column longer rather than the windows getting narrower. Moving around is one key or one swipe, and the arrangement is something the app holds rather than something you maintain.
Ribbon works that way, and it is the same idea ShiftIt had about the keyboard, pointed at a different problem:
- Control-Option with the arrow keys walk along the strip and carry the focused window with them
- Control-Option-1 to 9 jump straight to a column
- Control-Option-R cycles a column through a third, a half and two thirds
- Control-Option with equals or minus changes the width in 10% steps
- Control-Option-C centres the column
- Control-Option-F takes one window to full width
- Control-Option-N sends a window to the next display, and Shift-Control-Option-N moves you there without carrying it
- Control-Option-T floats a window that should not be on the strip at all
The three-finger swipe moves along the strip as well, each display keeps its own strip, widths are remembered per app, and the order and the widths are still there after a restart. Minimised and full-screen windows keep their place on it.
That is $15 once for up to 3 Macs, with a full refund within 10 days, on macOS 14 Sonoma and later, Apple silicon and Intel Macs. If you would rather stay with a snapper, the table further up has seven honest options and two of them are free.
The two things that made ShiftIt feel unreliable
Worth knowing whichever app you end up with, because neither of them was really ShiftIt’s fault.
It needed permission, and the permission read like a warning. ShiftIt drove other apps through the macOS Accessibility API, the same route every window manager uses, and without that access it could not move a window at all. The readme’s troubleshooting section is long: a paragraph on repairing the permission, a paragraph on why the System Settings pane does not match the instructions, and a one-line fix involving a Terminal command that writes into the system’s permission database. That command dates from 2013, and since macOS Mojave the file it targets has been protected by System Integrity Protection, so treat it as a museum piece rather than a repair. The real fix is the unglamorous one: uncheck ShiftIt in the Accessibility list and check it again.
It could not always do what you asked, and the readme admits it. ShiftIt is based on a Cocoa Accessibility API, and sometimes this API can be a bit fragile and not do exactly what it should, which is the maintainer’s own wording. In practice that means windows whose apps set their own minimum widths come out slightly wrong, which is why a terminal snapped to the left half can be wider than half the screen. That problem did not go away when ShiftIt did. It is still there in Rectangle, still there in Ribbon, and the apps that handle it best are the ones that tell you about it. ShiftIt, to be fair to it, told you.
The third thing is the one that sends people here in the first place. An app that is not signed, that has not been compiled since 2018, and that asks for permission to control every other app on your Mac is a lot of trust to extend to a zip file. It is not malware. It is also not something anyone is watching.
The short version
ShiftIt was right about the keyboard and it was right about being free, and then the person who wrote it moved to Linux and nobody picked it up. The download still works, the shortcut map above still works, and the app itself is a 2018 Intel build with no signature that asks to run through Rosetta on an Apple silicon Mac. The ShiftIt Spoon keeps 16 of its 25 shortcuts alive on the same keys, and Rectangle and Moom will happily take the rest. What none of them inherited is the part where you stop placing windows by hand, because that is a different job, and it is the one a scrolling window manager exists to do.
Questions
Is ShiftIt still available for Mac?
The download is still up. ShiftIt 1.6.6 is a zip of about 830 KB on the project's GitHub releases page, and it has been fetched well over half a million times. What is not available is support: the last release was published on 1 March 2018, the project has been publicly asking for a new maintainer since November 2018, and the newest issue on the tracker is a request for Apple silicon support that nobody has answered.
Does ShiftIt work on Apple silicon?
It would have to run through Rosetta 2. The app inside the last download is a thin x86_64 executable, not a universal one, so an M-series Mac has to translate it, and Rosetta is a separate install. It is also not signed at all, so Gatekeeper blocks it until you right-click the app and choose Open. Nothing in this page has installed or tested ShiftIt on a current macOS.
What is the best ShiftIt alternative for Mac?
For the same keys on the same modifiers, the ShiftIt Spoon for Hammerspoon, which the ShiftIt readme itself recommends. It is free, and its default shortcuts are ShiftIt's. The catch is that it lives in a Lua config file. If you would rather not edit one, Rectangle is free and open source and covers the halves, the quarters, the centre and the thirds with keys of its own.
Why did ShiftIt stop being updated?
The maintainer wrote the reason in a public issue in November 2018. His MacBook was stolen from a hotel room in Vienna, the university he worked at gave him a Dell running Linux while he waited for a replacement, and by the time a new Mac arrived he had moved to Linux and did not want to go back. The issue asking for a new maintainer is still open, and the last commit to the repository was pushed in November 2023.
Is ShiftIt the same as the Hammerspoon ShiftIt Spoon?
No, and it is worth being clear about which one you are installing. ShiftIt is a standalone menu bar app that stopped being developed in 2018. The ShiftIt Spoon is a Hammerspoon configuration written in 2020 that copies ShiftIt's window behaviour and its keyboard shortcuts into Hammerspoon, so it can be maintained by anyone who edits the file. It covers 16 of ShiftIt's 25 actions and none of the nine third-position ones.
Ready? Buy Ribbon for $15, or read all the guides.