Maximize a window on a Mac
There is no maximize button on a Mac. Apple's own name for it is Fill, and the green button does three different things depending on how you click it.
By Chethan Kumar S N · Updated
Somebody hands you a Mac with a document open and your hand goes looking for the square in the corner. It is not there, and it never has been. The green button is the closest thing, and the green button does something else entirely when you click it.
Apple’s own help writes the answer down, in a section called Maximize or minimize app windows. The verb it uses is Fill.
What Apple calls it
Straight from Apple’s help page, one sentence long: hold the pointer over the green button in the top left corner of an app window, then click Fill below Fill & Arrange, or press Fn-Control-F. To return to the previous window size, Option-click the button again.
That sentence contains the whole trick and almost nobody reads it, because it is filed under a heading about maximizing rather than one about the green button. Two things are doing the work here.
Hover, do not click. A straight click on the green button is still the full screen route. It is when the pointer rests on the button that the menu opens, and Fill is in that menu.
Fn-Control-F is the shortcut. It is the closest thing macOS has to a maximize key, and it works while the window is focused, with no menu involved.
The other reason people miss Fill is that both options live on one button. Apple lists them side by side in its tiling shortcut table: Fill is described as expanding the active window to fill the desktop, and the same table carries Centre on Fn-Control-C and Return to Previous Size on Fn-Control-R. Three keys, one button, no square anywhere.
The green button does three different things
| How you use it | What runs | Keyboard |
|---|---|---|
| Hover, then click Fill | The window expands to fill the space between the menu bar and the Dock | Fn-Control-F |
| Click it straight away | Full screen: the app gets a space of its own and the menu bar and Dock go away | Control-Command-F to leave it |
| Option-click after filling | The window returns to the size it had before it was filled | Fn-Control-R |
There is also a Centre option, Fn-Control-C, which sounds like the same thing and is not. Centre puts the window in the middle of the desktop at its current size. Fill gives it the whole desktop. Centre is the one to use when a window has wandered somewhere silly, not when you want it bigger.
Hovering with the Option key held reveals a second set of layouts, the ones that place two windows at once, and each of those has a shortcut built on Fn-Control-Shift plus an arrow key. Those are arrangements rather than a maximize, and how to tile windows on a Mac is the long version of them.
Three routes, and the fastest one
Fn-Control-F. Two fingers, one letter, done. It works in the front window of any app and it is the one worth learning.
The green button’s menu. Hover over the button, wait for the layouts to appear, click Fill. Slower, and worth knowing because the same menu is where the halves, quarters and corner layouts live.
The Window menu. Choose Window in the menu bar and Fill is listed there with Centre, holding the same layouts. This is the route to use when a trackpad is not in front of you, though Fn-Control-F is still quicker.
Double-clicking the title bar, if you set it that way. Open System Settings, click Desktop & Dock, and find the row called Double-click a window’s title bar to. It has four options and Apple’s wording for each one is short. Fill expands a window to fill the space between the menu bar and the Dock. Zoom zooms a window. Minimise sends it to the Dock. No Action does nothing. If yours is set to Zoom or No Action, double-clicking the title bar will never maximise anything, and the setting is often the thing that changed after a macOS upgrade without anyone noticing.
Fill, Zoom and Minimise all stop at the same two lines, and they are drawn by the menu bar above the window and the Dock below it. Both can be moved out of the way. Hiding the menu bar on a Mac is one row in System Settings, and hiding the Dock is one keystroke. Take both away and Fill has the whole height of the display to grow into.
Fill, Zoom and full screen are three different things
This is where most of the confusion lives, including Apple’s own word Zoom, which does not mean what people assume.
| How to trigger it | What actually changes | |
|---|---|---|
| Fill | Fn-Control-F, or Fill in the green button’s menu | The window grows into the space between the menu bar and the Dock. Those stay put |
| Zoom | A click on the green button in an app that cannot go full screen, or the title bar double-click set to Zoom | The window toggles between the size the app thinks is best and the size you gave it |
| Full screen | A click on the green button | The app gets a space of its own. The menu bar and the Dock slide away until the pointer reaches the top of the screen |
Apple’s developer documentation explains Zoom better than its help does. It describes it as a toggle between the window’s standard state, which the application provides as the best size to display the window’s data, and its user state, the size you set yourself by moving or resizing it. In other words the app chooses what big means, not you and not the screen. In an app that has opinions about its own layout, that can be a window that barely grows at all.
Two details from the same page answer questions people ask every week. If the window is currently in the standard state, the comparison that decides what happens next allows a few pixels of slack, so a window sitting at its standard size counts as already zoomed and the next click returns it to your size instead. And if the window has never been zoomed, there is no saved user state, so the size and location of the window do not change at all. That is the honest explanation for a green button or a double-click that appears to do nothing. It is not broken. It has nowhere to go back to.
Full screen is the third behaviour and it is a much bigger change than either of the other two, because it takes the window off the desktop entirely. How to make a window full screen on a Mac covers that one properly, including why the button ignores you in apps that do not support it.
Why the button ignores you
Work down this list, because the first three cover most cases.
It has already happened. Zoom toggles and Fill is undone by its own key. Fn-Control-F twice in a row, or Fn-Control-F then Fn-Control-R, puts the window back where it started, which can look like a dead button if you pressed it twice.
There is nothing to return to. A window that has never been zoomed has no saved size, and by Apple’s own description of the sequence the window does not move.
The app does not allow zooming. Apps can refuse, and a window that cannot be resized will not fill anything. Tool palettes, inspectors and fixed-size dialogs are usually the ones, which why a window will not resize explains in more detail.
The window is in full screen or Split View. Both put the app in a space of its own, and the green button’s menu changes accordingly. Nothing fills a desktop it does not belong to. Leave full screen first, or drag the divider.
The Dock is along the side of the screen. Apple’s own wording for Fill accounts for it: the window fills the space to the side of the Dock, so a strip of wallpaper survives. Nothing has gone wrong.
Tiled windows have margins is switched on. That is a real setting in Desktop & Dock, and with it on a filled window keeps a small border instead of touching the edges.
The title bar double-click is set to something else. Fill, Zoom, Minimise or No Action. This catches people whose double-click used to work and quietly stopped.
What a maximize costs you
Filling a window is a way of hiding every other window on the desktop behind it, and that is fine when you are reading something and annoying when you are comparing two things. Fn-Control-R takes it back, and then you are where you started, sizing windows by hand again for the tenth time this week.
That loop is the reason Ribbon exists in the shape it is. Windows sit side by side in full-height columns on a strip that runs past the edges of the screen, so nothing needs maximizing to be readable and nothing gets buried behind the window you just filled. Widths are per app, so a window opens at the size you gave it last time, Control-Option with the arrow keys carries you along the strip, Control-Option with a number jumps straight to a column, and the order and the widths are still there after a restart. Nothing shrinks, nothing overlaps, and there is no button to hunt for.
Ribbon is $15, once, for up to 3 Macs, with a full refund within 10 days, and it runs on macOS 14 Sonoma and later on Apple silicon and Intel Macs.
Questions
Is there a maximize button on a Mac?
Not with a square on it, but there is a maximize action and Apple's help names it. The section called Maximize or minimize app windows says to hold the pointer over the green button in the top left corner of the window, then click Fill. So the green button doubles as the maximize button once you stop clicking it and start hovering over it. A straight click does something else.
What is the keyboard shortcut to maximize a window on a Mac?
Fn-Control-F. Apple lists it in its tiling shortcut table, where Fill is described as expanding the active window to fill the desktop. The same table gives Fn-Control-C to centre a window and Fn-Control-R to put it back to the size it had before it was tiled, so all three are two keys plus a letter. There is no shortcut that reproduces the Windows maximize key, because there is no maximize key to reproduce.
Why does the green button go full screen instead of maximizing the window?
Because clicking it is the full screen route and hovering over it is the layout route. Apple documents both on the same button: click and the app is given a space of its own with the menu bar and the Dock out of the way, hover and a menu opens with Move & Resize layouts and Fill. If the app cannot do full screen at all, the click falls back to enlarging the window, which is why two people can click the same button and get two different results.
How do I make a Mac window fill the screen but keep the menu bar and the Dock?
Use Fill rather than full screen. Apple's wording is that Fill expands the window to the space between the menu bar and the Dock, and if the Dock is along the side of the screen the window fills the space below the menu bar and to the side of the Dock. Trigger it with Fn-Control-F, from Fill in the green button's menu, or from Fill in the Window menu. The menu bar and the Dock stay where they are.
Why does maximizing a window on my Mac do nothing?
Because zoom is a toggle, and there has to be something to toggle back to. Apple's developer documentation describes the sequence as a comparison between the window's standard state, which the application provides as the best size to display its data, and your state, the size you last set by hand. If the current size and position already match the standard one within a few pixels, the window counts as zoomed and the next click returns it. And if the window has never been zoomed before there is no saved user state, so Apple's own description of the sequence says the size and location of the window do not change.
Ready? Buy Ribbon for $15, or read all the guides.