# Move a window that is off screen on a Mac

> A window can sit above the menu bar, past the side of the screen, or on a display you unplugged. How to bring it back, and how to stop it happening again.

Source: https://www.ribbonmac.com/guides/how-to-move-a-window-that-is-off-screen-on-mac · Updated 2026-11-13

A window you cannot reach is a strange kind of stuck. The app is running, the work is inside it, and the part of the screen you need is somewhere you cannot point at. On a Mac there are three reasons this happens and three different ways out, so it is worth ten seconds working out which one you have before you start dragging things around.

## Which of the three it is

| What you can see | Where the window actually is | The way back |
|---|---|---|
| Part of the window, with the title bar above the menu bar or an edge past the side of the screen | On this desktop, parked outside it | Centre it, or drag the part you can reach |
| Nothing at all, but the app has a dot under its Dock icon and a window shows in Mission Control | Another space, or the other display | Mission Control, then drag it |
| Nothing anywhere, and the app has no window to show at all | Minimised, hidden, or closed | The Dock, Command-H again, or reopen the app |

There is a fourth case where the window is on screen and simply too big to work with, which is a sizing problem rather than a position problem. [Why a window will not resize](https://www.ribbonmac.com/guides/how-to-resize-windows-on-mac) covers that one, including the warning macOS gives when the resolution you picked shows less space than the window was made for.

## When the title bar is off the top of the screen

This is the common one, and it usually arrives after a day on an external display. The window opens at the size and place it had on the monitor, the laptop screen is smaller or sits in a different spot in the arrangement, and the top of the window ends up behind the menu bar.

Apple's instruction for moving a window is a single line: drag the window by its title bar to where you want it. If any of the bar is showing, that works, and it is worth pulling the window down and to the side rather than trying to nudge it back to a position you will have to guess at. If your finger keeps slipping off the trackpad part way, [three finger drag](https://www.ribbonmac.com/guides/how-to-move-a-window-with-the-trackpad-on-mac) takes the held button out of the drag entirely. Apple adds a detail worth keeping: some windows can't be moved. Fixed-size dialogs, setup panels and a few app windows ignore the drag on purpose, so if nothing moves, that is usually why rather than something being broken.

If the bar itself is out of reach, there is a better route than dragging.

**Hold the pointer over the green button** at the top left of the window and look at the list that appears under Move & Resize. Choose **Centre**, or press **Fn (Globe) + Control + C**. Apple's description of it is exactly the fix you need here: Centre moves the active window to the centre of the desktop. A window in the centre of the desktop is a window you can reach, whatever happened to its coordinates. The same commands are in the **Window** menu of most apps, under **Move & Resize**.

That whole set of tiling commands arrived in **macOS Sequoia (15)**, so on macOS 14 and earlier there is no Centre to press and the drag is your only mouse route. Mission Control, further down this page, works on every version.

Two neighbours in the same list are worth knowing while you are there. **Fn + Control + F** fills the window to the space between the menu bar and the Dock, which always produces a window that fits on the screen, and **Fn + Control + R** returns a window to the size it had before it was tiled, which is the undo for both of them.

## Finding a window you cannot see at all

If no part of the window is on screen, stop hunting with the pointer and let macOS gather everything in one place.

Press **Control-Up Arrow** to open Mission Control. Every window on that display is laid out flat in a single layer instead of stacked on top of each other, and windows that are parked outside the screen are in that layer like any other. Drag the one you want to a place on the desktop, then click the desktop to leave. You can also drag it up into the spaces bar along the top edge and drop it onto a space, which is Apple's documented way of moving a window between desktops, and if you drop it on the thumbnail of a full screen app the two go into Split View together.

If you already know which app the window belongs to, there is a faster version. Switch to that app and press **Control-Down Arrow** to see all of its windows as a row of tiles, including any that never made it onto the screen. Click the one you want and it comes forward. With **Group windows by application** turned on in Desktop & Dock settings, the same keys show your windows sorted by app instead of in one pile.

One thing catches people out on a two screen desk. Enter Mission Control on your second display and it only shows the windows and spaces that belong to that display, so half your desktop appears to be missing. Nothing is missing. It is on the other screen, and the window you are chasing may be sitting in a space over there.

## When it went to another desktop or another display

macOS gives you a way to send a window to the next space without ever opening Mission Control. **Drag the window to the edge of the screen and hold it there.** After a moment it moves to the next space over. It needs a beat rather than a flick, and if you have ever done it by accident, that is the gesture that did it.

Spaces belong to displays, so on a two screen desk the space after the last one on your left screen is the first one on your right screen. Sit a window against the join, hold it, and it crosses the gap. [Moving a window between monitors](https://www.ribbonmac.com/guides/move-windows-between-monitors-mac) is the longer version of that, including the settings that quietly block it.

Two settings explain most of the windows that seem to move on their own. Under **Desktop & Dock**, in the **Mission Control** section:

- **Automatically rearrange Spaces based on most recent use** shuffles your desktops into the order you used them in, so a window is on desktop four one minute and desktop two the next.
- **When switching to an application, switch to a Space with open windows for the application** takes you to wherever that app already has a window when you switch to it, which looks like the window jumping desks.

Neither is wrong, but if you have ever described a window as lost when it was simply somewhere you did not leave it, one of those two is the reason.

## When the window is not on screen because it is gone

Two of these are reversible and one of them is not, and the Dock tells you which is which.

**Minimised.** The window is a thumbnail on the right hand side of the Dock, after the line. Click it and it comes back exactly as it was. If your Dock looks empty of windows, check one setting: with **Minimise windows into application icon** turned on in Desktop & Dock, the window is stored inside the app's own Dock icon instead of beside it, which is why a minimised window can look like it disappeared. Control-click the app's icon and its windows are in the menu.

**Hidden.** Command-H hides the app's windows without moving or closing anything, and they come back with a single click on the Dock icon or one more Command-H. If you hid the front app earlier and forgot, the whole desktop can look emptier than it is.

**Parked by Stage Manager.** If Stage Manager is on, the windows you are not using sit in a column down the left edge of the screen rather than filling the desktop. Move the pointer to the left edge and the column appears. [How to use Stage Manager](https://www.ribbonmac.com/guides/how-to-use-stage-manager-on-mac) covers turning it off if that arrangement is not for you.

**Closed.** Then it is not off screen at all, and the route back is the app itself. Most Mac apps restore the windows you had open at the position they were in, which is helpful right up until the position is the one from the display you unplugged.

## Why the same window keeps coming back off screen

The clue sits in the searches people make about this. Alongside the plain question there are ones naming InDesign, Illustrator and Premiere, and ones naming Chrome. What those have in common is that they keep their own record of where a window was.

Browsers remember the position of their windows. Adobe's creative apps store panel and window positions inside their own workspace files and settings. A few games lock a window to a resolution and position they chose. When the display those coordinates were measured against is gone, the app confidently puts the window exactly where it was, which is now nowhere.

Four things to try, roughly in this order:

1. **Quit the app and open it again.** Command-Q, then reopen. Most apps build a new window in the middle of the main display rather than restoring the old coordinates, which clears it in one step.
2. **Plug the display back in.** If you still have the monitor, this is the fastest fix of all, because the window never moved in the first place and it is waiting there.
3. **Turn on Close windows when quitting an application**, under Desktop & Dock in the section called Close and restore windows. Apple's own description is that with it on, documents and windows are not restored when you reopen an app. That means the app starts fresh with a window in a place that exists, at the cost of not restoring the tabs or documents you had open.
4. **Check the display arrangement.** Open Displays settings and look at Arrange. Apple's line for it is the whole instruction: drag the displays to the desired position, hold Option while dragging one on top of another to mirror them, and drag the menu bar to a different display to relocate it. Then make sure the rectangles actually touch. A display dragged out to its own island is a display whose windows you cannot drag anything onto, and a mirrored display is a copy of the first one rather than extra room, so a window saved for it has nowhere real to be. If a display is not being detected at all, hold Option in Displays settings and a Detect Displays button appears where the Night Shift button usually sits.

## Stop it happening again

The honest answer is that macOS will keep doing this, because a window's position belongs to the app and not to the system. Every app decides for itself whether it remembers where it was, and most decide yes.

You can make it rare. Keep one display arrangement that matches your desk rather than moving screens around in Displays settings, turn off **Automatically rearrange Spaces based on most recent use** if your desktops are always in a different order anyway, and keep **Close windows when quitting an application** on if you would rather apps started fresh than clever.

Or take the position out of the app's hands. A window manager places windows itself, so a window cannot be saved somewhere impossible in the first place. **Rectangle** is free, and its half and quarter shortcuts will drag a window back into a screen position with one keypress, which doubles as a recovery tool. **Moom** does the same thing with chains, so one key can restore a window to a display and a size together.

Ribbon takes the other route and removes the problem rather than managing it. Every window gets its own full-height column on one strip that runs past the edges of the screen, and nothing is ever parked outside the desktop, because the screen moves rather than the windows. Open something new and it takes the next column along, at full size, in a place you can always scroll to. Control-Option and the arrow keys walk the strip, Control-Option-1 to 9 jump straight to a column, and each display gets its own strip, its own focus and its own scroll.

That is $15 once for up to 3 Macs, with a full refund within 10 days, on macOS 14 Sonoma or later and Apple silicon and Intel Macs. [Try the strip in your browser](https://www.ribbonmac.com/#drive) or see [how a scrolling window manager works](https://www.ribbonmac.com/guides/what-is-a-scrolling-window-manager).

## FAQ

### How do I move a window that is off screen on a Mac?

If part of the window is still visible, drag it by its title bar until the hidden edge comes back. If the title bar is the part that is missing, hold the pointer over the green button at the top left of the window and choose Centre, or press Fn-Control-C, which moves the active window to the middle of the desktop and back into reach. On macOS 14 and earlier there is no Centre command, so use Mission Control instead: press Control-Up, find the window in the layer of open windows and drag it back.

### Why does a window open off screen on a Mac?

Almost always because the app saved where the window was last time, and that position belonged to a display that is not connected any more or a screen arrangement that has changed. Apps that keep their own window coordinates are the ones that do this, and browsers, Adobe's creative apps and a few games are the usual suspects. Most apps come back onto the remaining screen when a display is unplugged, and the ones that do not are the ones storing a position in their own settings or workspace file.

### How do I find a window I cannot see on a Mac?

Press Control-Up to open Mission Control, which lays every window on that display out flat in one layer so you can spot the missing one and drag it. If you know which app it belongs to, switch to that app and press Control-Down to see all of its windows as a row of tiles, including the ones that are not on screen. Mission Control on a second display only shows the windows and spaces that belong to that display, which is why a missing window sometimes appears to be somewhere else entirely.

### Is there a keyboard shortcut to bring a window back on screen on a Mac?

Fn-Control-C centres the active window, which is the closest thing macOS has, and it needs macOS Sequoia or later. Fn-Control-F fills the window to the space between the menu bar and the Dock, which also always produces a window you can reach. The shortcuts that move a window at all are Apple's window tiling ones, and every one of them acts on the window that already has focus, so they only help once you can click the window.

### How do I get back a window that was on a monitor I unplugged?

Plug the display back in and the window is usually still there, which is the fastest fix if you still have the screen. If you do not, quit the app with Command-Q and open it again, because most apps reopen a new window in the middle of the main display rather than at the old coordinates. Opening Displays settings and holding Option shows a Detect Displays button, and rearranging the display rectangles so they touch each other is what keeps windows from being placed in a space that no longer has a screen.
